HSM 300 Series

wakabe-hsm300

The HSM Modular series is constructed to withstand outdoor harsh weather conditions without maintenance. Designed for a permanent mounting to last its effective lifetime, the HSM series is a general purpose with its effective HID-equivalent luminaire is applicable in almost all outdoor scenarios. In addition, its superior design is equipped with a unique heat dissipation mechanismto perform reliable high-power rating per lamp on a solid-state platform. Its modular design enables single module replacement in the event of LED/PCB failure and power drivers thru plug connection without any requirement of physical wiring.

Features

Outdoor – High Mast, Apron, Sports facilities, billboards, etc.
Indoor – Workshops, Warehouse, Cold room, Sports Arena, Plants and Factories.

Uncommonly high energy savings against conventional lighting up to 80% in 1:1 replacement ratio

  • Powder Coated Aluminum ADC12 Body (Grey available)
  • Modular Body design to with stand 5G vibration
  • Electronic Driver in IP66 water safe casing
  • Light housing designed for wind tunnel test
  • Light housing designed for 500–hour salt spray test
  • Heavy duty mounting bracket with adjustable angle with safety chain to lighthousing, ballast optional(Ballast box detachment from body is optional)
  • Extra safety wire for ring covers attached to main housing
  • V2 Class flame retardant rubber seals
  • <IK08 Special lens design
  • Flame retardant cables
  • Extra low glare and light pollution
  • Top range CREE LED with highest Optical Control Factor (OCF)
  • Universal AC input (up to 305VAC)
  • Full range protection (LED driver) : Short-Circuit/Over-Current/Over-Temperature (Other protection classes please refer to data sheets of power supply)
  • Build in active Power factor correction (PFC)
  • Special SPD 10KA/20KA can be added
  • Meet 4KV surge immunity level (IEC6100-4-5)
  • Class 2 power unit/Pass LPS (Except for Meanwell HLG 120H Driver)
  • Lead free soldering on PCB.
  • Motion-Sensor/Dimmer-Sensor/Photo-Sensor/Timer options available
  • Dimming compatibility ; DALI, 0-10V, PWM options available
  • Special thermal pad (5-11W/mK) with ROHs compliance for efficient heat dissipation to ensure long life of LEDs
  • Special LEDs configuration to ensure minimum illuminance loss (max 4%) due to undesired failures
Main (input) voltage *90~305VAC (50/60Hz) *based on Meanwell HLG Series
Total Weight 13kg
Heat Tolerance -40°C till 40°C
Protection Class IP66, Class I
Color Temperature 5700K (Cool White)
Color Rendering RA70+
Lumen Efficiency Approx. 120 – 159 lm/watt
Light Source Life Span 50,000 – 100,000 hrs (Depends on ambient and operating wattages)
Lamp Type 240/280/320W Cree LED
Operating position Universal
Energy Consumption 258/296/338W
Start Time Instant
Driver IP65/IP66/IP67 available
Available Optics D203-1530 D203-6090 D203-35155
D203-3060 D203-30140
Option Available Safety Chain
General Warranty #1 year

HSM 700 Series

wakabe-hsm700

The HSM Modular series is constructed to withstand outdoor harsh weather conditions without maintenance. Designed for a permanent mounting to last its effective lifetime, the HSM series is a general purpose with its effective HID-equivalent luminaire is applicable in almost all outdoor scenarios. In addition, its superior design is equipped with a unique heat dissipation mechanismto perform reliable high-power rating per lamp on a solid-state platform. Its modular design enables single module replacement in the event of LED/PCB failure and power drivers thru plug connection without any requirement of physical wiring.

Features

Outdoor – High Mast, Apron, Sports facilities, billboards, etc.
Indoor – Workshops, Warehouse, Cold room, Sports Arena, Plants and Factories.

Uncommonly high energy savings against conventional lighting up to 80% in 1:1 replacement ratio

  • Powder Coated Aluminum ADC12 Body (Grey available)
  • Modular Body design to with stand 5G vibration
  • Electronic Driver in IP66 water safe casing
  • Light housing designed for wind tunnel test
  • Light housing designed for 500–hour salt spray test
  • Heavy duty mounting bracket with adjustable angle with safety chain to light housing, ballast optional (Ballast box detachment from body is optional)
  • Extra safety wire for ring covers attached to main housing
  • V2 Class flame retardant rubber seals
  • <IK08 Special lens design
  • Flame retardant cables
  • Extra low glare and light pollution
  • Top range CREE LED with highest Optical Control Factor (OCF)
  • Universal AC input (up to 305VAC)
  • Full range protection (LED driver) : Short-Circuit/Over-Current/Over-Temperature (Other protection classes please refer to data sheets of power supply)
  • Build in active Power factor correction (PFC)
  • Special SPD 10KA/20KA can be added
  • Meet 4KV surge immunity level (IEC6100-4-5)
  • Class2powerunit/PassLPS(ExceptforMeanwellHLG120HDriver)
  • Lead free soldering on PCB.
  • Motion-Sensor/Dimmer-Sensor/Photo-Sensor/Timer options available
  • Dimming compatibility ; DALI, 0-10V, PWM options available
  • Special thermal pad (5-11W/mK) with ROHs compliance for efficient heat dissipation to ensure long life of LEDs
  • Special LEDs configuration to ensure minimum illuminance loss (max 4%) due to undesired failures
Main (input) voltage *90~305VAC (50/60Hz) *based on Meanwell HLG Series
Total Weight 30 kg
Heat Tolerance -40°C till 40°C
Protection Class IP66, Class I
Color Temperature 5700K (Cool White)
Color Rendering RA70+
Lumen Efficiency Approx. 120 – 159 lm/watt
Light Source Life Span 50,000 – 100,000 hrs (Depends on ambient and operating wattages)
Lamp Type 560/600/640W Cree LED
Operating position Universal
Energy Consumption 590/633/675W
Start Time Instant
Driver IP65/IP66/IP67 available
Available Optics D203-1530 D203-609 D203-35155
D203-3060 D203-30140
Option Available Safety Chain
General Warranty #1 year