IS 100 Series

wakabe-is100

The IS series is a series of low wattage luminaires designed to deliver the most illumination out of the least power consumption. Its lean and material-efficient design coupled with patented Prismatic lens is built to cater to users who are looking for superior lighting quality at low heights, while ensuring optimal light dissipation and diminished glare.

Features

Outdoor– Wall mounted lights, Short High Mast,Junctions,billboard.

Indoor – Workshop, Warehouse, Cold room, Sports facilities.

Uncommonly high energy savings against conventional lighting up to 80% in 1:1 replacement ratio

  • Powder Coated aluminum body (Black and Grey available).
  • Electronic Driver in IP66 water safe casing.
  • Built in breather to prevent any mist and dews forming.
  • Light housing designed for 500-hour salt spray test.
  • Light housing designed for wind tunnel test.
  • Heavy duty bracket with adjustable angle at 216° and safety chain(optional) ). Ballast box detachment from body is optional.
  • Extra safety wire for ring covers attached to main housing.
  • <IK08 special design lens
  • Extra low glare and light pollution
  • ToprangeCREELEDwithhighest OpticalControlFactor(OCF)
  • UniversalACinput(upto305VAC).
  • Full range protections : Short-Circuit/ overcurrent/ over temperature forLED Driver.
  • Build in active Power factor correction (PFC).
  • Special SPD of 10KA/20KA can be added.
  • Meet 4KV surge immunity level (IEC6100-4-5).
  • Class2powerunit/PassLPS(ExceptforMeanwellHLG120HDriver).
  • Lead free soldering on PCB.
  • Special accessories : Motion sensor/ dimmer sensor/ Photo sensor/Timer can be added
  • Other protection classes please refer to data sheets of power supply.
Main (input) voltage *90 ~ 305 VAC (50/60Hz)
*based on M eanwell HLG Series
Total Weight 5 kg
Heat Tolerance -40°C till 40°C
Protection Class IP66, Class I
Color Temperature 5600K (Cool White)
Color Rendering >RA70+
Lumen Efficiency Approx. 120 – 159 lm/watt
Light Source Life Span 50,000 – 100,000 hrs (Depends on ambient and operating wattages)
Lamp Type 100/120W Cree LED / COB LED
Operating position Universal
Energy Consumption 107/129W
Start Time Instant
Driver nternal with casing or External Ip67
Available Optics D288 – 1428 D288 – 30120
D288 – 6060 D288 – 9090
D288 – 105105
Option Available Connector, Safety Chain, Black or Grey available
General Warranty #1 year

IS 200 Series

wakabe-is200

The IS series is a series of low wattage luminaires designed to deliver the most illumination out of the least power consumption. Its lean and material-efficient design coupled with patented Prismatic lens is built to cater to users who are looking for superior lighting quality at low heights, while ensuring optimal light dissipation and diminished glare.

Features

Outdoor – Wall mounted lights, Short High Mast,Junctions,billboard.

Indoor – Workshop, Warehouse, Cold room, Sports facilities.

Uncommonly high energy savings against conventional lighting up to 80% in 1:1 replacement ratio

  • Nano Coated aluminum body (Black and Grey available).
  • Electronic Driver in IP66 water safe casing.
  • Built in breather to prevent any mist and dews forming.
  • Light housing designed for 500-hour salt spray test.
  • Light housing designed for wind tunnel test.
  • Heavy duty bracket with adjustable angle at 216° and safety chain(optional) ). Ballast box detachment from body is optional.
  • Extra safety wire for ring covers attached to main housing.
  • <IK08special design lens
  • Extra low glare and light pollution
  • Top range CREE LED with highest Optical Control Factor (OCF)
  • Universal AC input (up to 305VAC).
  • Full range protections : Short-Circuit/ overcurrent/ over temperature forLED Driver.
  • Build in active Power factor correction (PFC).
  • Special SPD of 10KA/20KA can be added.
  • Meet 4KV surge immunity level (IEC6100-4-5).
  • Class2powerunit/PassLPS(ExceptforMeanwellHLG120HDriver).
  • Lead free soldering on PCB.
  • Special accessories : Motion sensor/ dimmer sensor/ Photo sensor/ Timer can be added
  • Other protection classes please refer to data sheets of power supply.
Main (input) voltage *90 ~ 305 VAC (50/60Hz)
*based on M eanwell HLG Series
Total Weight 6.5 kg
Heat Tolerance -40°C till 40°C
Protection Class IP66, Class I
Color Temperature 5600K (Cool White)
Color Rendering RA70+
Lumen Efficiency Approx. 120 – 159 lm/watt
Light Source Life Span 50,000 – 100,000 hrs (Depends on ambient and operating wattages)
Lamp Type 120W/150W/185W/200W Cree LED
Operating position Universal
Energy Consumption 129W/160W/197W/215W
Start Time Instant
Driver Internal with casing or External Ip67
Available Optics D288 – 1428 D288 – 30120
D288 – 6060 D288 – 9090
D288 – 105105
Option Available Connector, Safety Chain, Black or Grey available
General Warranty #1 year